< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=406408698084575&ev=PageView&noscript=1" />

Electromagnetic Flowmeter Digital Magnetic Flowmeter

Sewage, water, tap water, acid, alkali, salt and other strongly corrosive liquids, raw water, cooling water, paper pulp, mud, coal pulp, mineral pulp, syrup, corn steep liquor, fiber pulp, grain pulp, lime milk, hydrogen peroxide, sea water, beer , Wort, milk and various beverages and other conductive liquids and solid-liquid two-phase liquids.

JXCT-IoTJXCT-IoT

JXCT-IoT

Electromagnetic Flowmeter Digital Magnetic Flowmeter

The electromagnetic flowmeter is widely used in water (tap water, industrial water, and sewage treatment) metallurgy, chemical, textile, food, paper, power, pharmaceutical and other industrial areas. It applies to measure (is fit for the measurement of ) the volume flow of conductive medium including the acid, alkali, salt solution, slurry, pulp, paper pulp, waste water.

Electromagnetic Flowmeter Parameter
Liner
PTFE, rubber

Temperature

Rubber liner<80   -20~90

PTFE liner<180℃   -30~180


Pressure

DN10-DN80≤4.0MPa

DN100-DN150≤1.6MPa

DN200-DN300≤1.0MPa

Accuracy
0.5%   Large diameter plug-in type (level 2.5)
Power supply
24V 220 lithium battery customize
Display
On-site display, split display, upper and lower limit alarm
Communication Method
RS485
Output
Pulse current 4-20mA
Electrode316L, HC, Ti , Ta, Pt

JXCT-IoT

JXCT-IoT

JXCT-IoT

JXCT-IoT

JXCT-IoT

JXCT-IoT

JXCT-IoT

JXCT-IoT

JXCT-IoT

JXCT-IoT

JXCT-IoT

JXCT-IoT

JXCT-IoT

Caliber Flow

Caliber

(mm)

Minimum flow(m3/h)Maximum flow(m3/h)

Caliber

(mm)

Minimum flow(m3/h)Maximum flow(m3/h)

10

0.0283
4.24
80
1.8
271.0
15

0.0636

9.54
100
2.82
424.0
20
0.12
16.96
125
4.41
662.0
25
0.176
26.5
150
6.36
954.0
32
0.29
43.42
200
11.3
1690
40

0.452

67.85
250
17.6
2650
50
0.7
106.0
300
25.4
3810
65
1.19
179.0



Liner Selection

Liner Material

                  Main Performance
Medium temperatureScope of Application



Neoprene

1. Excellent elasticity, high breaking force, good wear resistance
2. Resistant to the corrosion of general low-concentration acid-base salt medium and not resistant to oxidizing medium.



80℃

Water, sewage, soft abrasive mud, mineral slurry.







Teflon

1. It can resist almost all chemical media, can withstand boiling hydrochloric acid, sulfuric acid, nitric acid and aqua regia, also can withstand concentrated alkali and various organic solvents, and is not resistant to chlorine trifluoride, high temperature oxygen trifluoride, high flow rate liquid fluorine, liquid Corrosion of oxygen and ozone.
2. Wear resistance is not as good as polyurethane rubber.
3. The resistance to negative pressure is not as good as neoprene.






100℃




Strong corrosive media such as concentrated acid and alkali

Sanitary medium
Electrode selection
Liner Material

Corrosion resistance


316L

Application: 1. Domestic water, industrial water, raw water, well water, urban sewage
2. Weakly corrosive acid, alkali, salt solution



Hastelloy B

Application: 1. Non-oxidizing acids such as hydrochloric acid (concentration less than 10%).
2. Sodium hydroxide (concentration less than 50%), all concentrations of sodium hydroxide alkali solution
3. Phosphoric acid, organic acid
Not applicable: Nitric acid


Hastelloy C

Application: 1. Mixed acid and mixed solution of Ming acid and sulfuric acid
2. Oxidizing salts Fe+++, Cu++, sea water
3. Phosphoric acid, organic acid
Not applicable: Hydrochloric acid




Ti

Application: 1. Salt, such as: (1) chloride (chloride/magnesium/aluminum/calcium/ammonium/iron, etc.); (2) sodium salt, potassium salt, ammonium salt, hypoaluminate, sea water
2. The concentration is less than 50% potassium hydroxide, ammonium hydroxide, barium hydroxide alkali solution
Not applicable: Hydrochloric acid, sulfuric acid, phosphoric acid, hydrofluoric acid and other reducing acids




Ta

Application: 1. Hydrochloric acid (concentration less than 40%), dilute sulfuric acid and concentrated sulfuric acid (not including oleum)
2. Chlorine dioxide, ferric chloride, hypochlorous acid, calcium oxide, acetic acid, etc.
3. Oxidizing acids such as nitric acid (including fuming nitric acid), aqua regia with a temperature lower than 80℃
Not applicable: alkali, hydrofluoric acid

 

Pt

Application: almost all acid, alkali, salt solutions (including fuming sulfuric acid, fuming nitric acid)
Not applicable: aqua regia, ammonium salt
Tungsten CarbideApplication: Pulp, sewage, can resist the interference of solid particles
Not applicable: inorganic acid, organic acid, chloride

JXCT-IoT

JXCT-IoT

JXCT-IoT

JXCT-IoT

JXCT-IoT

Weihai JXCT Electronic Technology Co., LTD

No. 221-1 Huoju Road, Huoju High-tech Industrial Development Zone, Weihai City, Shandong Province

Tel

+86 18657133927

Email

charlie.jxctdzkj@gmail.com

Working Time

7 days 24 hours

Contact Us

charlie.jxctdzkj@gmail.com

Products
Form
WhatsApp
Email